£99.99

Acoustand Audio Sub Platter & Bearing Upgrade For Pro-ject Debut

ALLOY | SILVER
Acoustand Audio are proud to announce the worlds first commercially available Pro-Ject Debut Alloy sub-platter and bearing upgrade for the following Debut models.


Debut 0.5

Debut II All Varieties

Debut III All Varieties

Debut Carbon

Debut Carbon Esprit SB

Debut Carbon Phono USB

Crosley C10

Music Hall MMF-2.2

Possibly other models please Let us know which you have.

Take a good look at the photo of the two bearings side by side, the project bearing is distinctive looking, if you have this bearing then this kit will fit your turntable.

This Precision made Sub-platter with hi carbon polished steel spindle is made from hi grade 6082 high strength alloy and finished in a super hi quality anodised satin finish. This fine finish exudes quality and will not corrode or discolour over time like a plain turned or polished alloy will and does not show fingerprints.The Spindle is slightly longer on top than original for record clamps.

The high quality bearing is precision made from the best engineering thermoplastic Acetal which is known for it's high strength, hardness and rigidity and does not wear like conventional plastics and used through out the world in bearing assemblies and is fully tested prior to shipping. Each bearing is matched perfectly to the sub-platter it is shipped with.

This classic style bearing is supplied with a high quality ball bearing you pop into the housing before putting the oil in. The original Plastic Moulded project bearing housing has a built in bearing that cannot be changed and will wear quickly with the weight of the new sub-platter which is why we supply our own new bearing housing which has 3 times the strength and mass of the original massively improving the sound of your turntable.

We have just 15 of these precision made sub-platters and bearing kits for the Debut etc in silver at an amazing price of just 99.99

Tolerances

For Your Information There Are 1000 Microns In 1 millimeter

Runout typically within 1 micron or less on this large sub-platter.

Spindle shaft typically 1 microns.

Physical platter size is exactly same as original.


We also have sub-platter Bearing kit upgrades for the project Xpression Series in our other listings.


Rega Sub platters Also Available On Our Other Listings.


The plastic lightweight sub-platter and bearing that came with your turntable listed above though good at it's job can be massively improved upon bringing so much more detail and mass to your lightweight turntable.

We have put a considerable amount of time and research into these products and this will sure to be experienced by you with astonishing results.


Upgrading your turntables sub-platter and/or bearing or both is one of the best and easiest upgrades you can do. Simply remove your old sub platter and bearing, replace the bearing housing, drop the ball bearing into it and pop around 6 drops of oil into it and on the spindle before placing it in. Be sure not to force it in just put it in a little gently turning it and let it gently self lower, which can take some time. A little oil might come up but this is normal, as delrin is self lubricating not as much oil will be needed over the standard amount.
It is recommended you re-new your oil when changing sub-platters.

Oil kits also available on our other listings.

Some photos show the physical difference between the original sub-platter and bearing with new sub-platter and bearing.

This item/s are not designed to be used with the original subplatter and or bearing as tolerances are slightly different.


If you have any questions please ask.


This item will despatch same day or within 1-2 working days
Acoustand Audio Sub Platter & Bearing Upgrade For Pro-ject Debut listed in: